Restoring a neglected glazed tile surface is easy with this problem-solving Tile Guard® acidic cleaner. It is strong enough to remove excess dried grout and mortar as well as dirt, rust, grime and efflorescence. This is not a regular maintenance cleaner. This heavy duty cleaner should be used when you need to solve tough problems.

It’s also great with tile installations where excessive grout still remains, as this will quickly and efficiently remove grout from the top of glazed tile, masonry or acid-resistant surfaces. The cleaner isn’t left on the surface long enough to damage grout lines. Perfect for spot cleaning, use it where the removal of stains or rust is necessary.

This product cannot ship to California.

• Read ENTIRE label before using.
• Allow newly grouted installations a minimum of 10 days before using.
• Protect hands with rubber gloves and eyes with chemical goggles. Wear protective clothing.
• Wet surface with water.
• Pre-mix Heavy Duty Tile and Grout Acidic Cleaner with 5 quarts of water (depending upon cleaning task, a stronger solution can be used).
• Apply solution to wet surface and allow to stand 1 to 2 minutes.
• Agitate with non-metallic brush or nylon scrub pad; do not allow solution to dry on surface.
• Mop or wipe up dirty solution, and rinse thoroughly with clean water using nylon scrub pad or non-metallic brush to agitate cleaner to ensure removal of cleaners and acid.
• Allow surface to dry completely. A second application may be necessary for heavily soiled areas.
• If surface is to be sealed, neutralize with baking soda wash (4 Tablespoons per quart of water), clean with an appropirate Tile Guard cleaner then rinse thoroughly, and allow to dry completely before sealing.

For use on these surfaces:

• Ceramic
• Masonry
• Acid-resistant stone
• Sub-floors

• Cleans, strips, degreases
• Dissolves excess grout and mortar
• Removes stains and rust

Safety Recommendations

• DANGER POISON!
• KEEP OUT OF REACH OF CHILDREN

• CAUTION: Contains HYDROCHLORIC ACID, PHOSPHORIC AND 2-BUTOXYETHANOL.
• POISON: Fatal if swallowed.
• CORROSIVE: Causes severe burns.
• Vapor Harmful.
• Use only with adequate ventilation.
• Avoid breathing vapors, sprays or mists.
• Do not swallow or take internally.
• Do not get in eyes, on skin or on clothing.
• Wash thoroughly after handling.
• Keep container closed.
• Use only in a well-ventilated area. Keep away from heat, sparks and flame.
• Do not expose to heat or store at temperatures above 120°F.
• Open container carefully.
• Clean up spills, rags and papers, and dispose of them promptly.

First Aid

• EYE CONTACT: Immediately flush eyes with water for at least 15 minutes and seek medical attention immediately.
• SKIN CONTACT: Rinse thoroughly. If skin becomes irritated and symptoms persist, get medical aid immediately.
• IF INGESTED: Do not induce vomiting. Drink a large glass of milk or water. Call physician, hospital or Poison Control Center immediately.
• For emergencies refer to the product’s MSDS.