Tile Guard® One Step Wall & Counter Grout Sealer eliminates the need to spend hours cleaning off residue from applying a grout sealer to your tile. One Step’s formula makes excess sealer evaporate, there is no hard-to-remove residue on the tiles. Spray along the grout lines and don’t worry about getting it on the tiles.

This sealer penetrates and provides a long-lasting barrier to resist stains from spills, water, and oil on your grout. This protection lasts up to 15 years, depending on the surface type and use.

1. Allow newly applied grout to cure overnight before applying sealer.
2. Clean existing grout thoroughly with Tile Guard® Extra Strength Tile & Grout Cleaner or apply Tile Guard® Grout Coating to recolor discolored or stained grout before sealing.
3. Test in an inconspicuous place for compatibility and satisfactory seal by seeing if water beads on the surface.
4. SHAKE CAN WELL BEFORE USING.
5. Invert can and point nozzle away from you; aim it at the grout line from a height of 10–15 inches.
6. Press the nozzle and spray along the grout line, avoiding excess sealer that may result in pooling or residue.
7. If pooling occurs, it is best to remove with a cloth while wet. (A cloth dampened with warm water will easily wipe up residue when it is dried.)
8. A second coat should be applied one hour or more after the first coat.
9. The surface may have things placed on it when dry to the touch and a full cure is achieved in 24 hours.
10. Depending on use and wear, sealer may need to be reapplied after 1–3 years.

Coverage

• Approx. coverage for 2 coats: 12x12 tiles–250 sq. ft.
• Approx. coverage for 2 coats: 4x4 tiles–95 sq. ft.
• Linear coverage is 500 feet with two coats.

Expected Wear

• Up to 15 years depending upon various factors: surface porosity, surface wear, harsh cleaning methods such as high-alkaline or solvent-based cleaners, and frequency and type of maintenance products.
• Test for water absorption periodically and reseal when water starts to absorb.
• For best protection, reseal annually to be certain your protection is at its best.

For use on these surfaces:

• Grout between ceramic tile
• Grout between sealed natural stone

• Formula evaporates eliminating need for clean-up
• Protects grout from water, oil-based and solvent-based stains
• Provides 15 year protection

Safety Recommendations

• KEEP OUT OF REACH OF CHILDREN
• DANGER! Contains: Hydrocarbon solvent, Propane, Isobutane, Butyl acetate, and sealant polymer.
• VOC 586g/L
• Use only with adequate ventilation. Prevent build-up of vapors by opening all windows and doors to achieve cross-ventilation. Overexposure may cause lung damage. Do not breathe vapor or spray mist. Use only as directed and only in areas adequately ventilated to prevent vapor buildup. Do not use in enclosed or confined spaces. Where adequate ventilation can not be guaranteed, an appropriate and properly fitted NIOSH approved respirator should be used, and should only be done in accordance with manufacturer’s directions for respirator use.
• Exposure to heat or prolonged exposure to sun may cause the can to burst. Fumes or vapors may catch fire. Keep away from heat, sparks, and flame. Extinguish all flames and turn off any ignition sources. Do not expose to heat or store at temperatures above 120˚ F.
• Avoid contact with skin, eyes, and clothing. Use safety glasses and gloves. Wash hands thoroughly after project is completed.
• Intentional misuse by concentrating and inhaling contents may be harmful or fatal.
• Do not puncture or incinerate container.
• Clean up spills, rags, papers, and waste promptly and dispose of wastes in metal trash can.

First Aid

• EYE CONTACT: IMMEDIATELY flush with water for at least 15 minutes. Get medical aid if irritation persists.
• SKIN CONTACT: Wash with soap and water. Get medical aid if irritation persists.
• INHALATION: Remove to fresh air. Get medical aid if necessary.
• INGESTION: Aspiration hazard. DO NOT induce vomiting. Get medical aid immediately.
• For emergencies refer to the product’s MSDS.