Learning quick and easy ways to spruce up your home is an art. This is a product you’ll use over and over again because it’s fast to do and the results are so gratifying.

Tile Grout Coating makes your grout look new again, without having to re-grout. Just apply Tile Grout Coating to grout lines, allow to dry, and wipe off. This coating actually re-whitens your grout to make it look like you just re-grouted!

You’re paying attention to the cosmetics of your grout by using this coating and you're also protecting it. Tile Grout coating by Tile Guard® provides a physical barrier against soil and mildew stains as it re-whitens.

Our unique formula deeply penetrates as it dries. Because this coating forms a durable bond with porous grout, it is suitable for use on floors and in showers. Restore your grout lines to original whiteness and guard against soiling and mildew stains in one easy step.

Preparation

1. Re-grout loose or missing grout.
2. Lightly scratch stubborn deposits with grout saw.
3. Re-caulk tub-tile joint.
4. Pre-clean areas with Tile Guard® Tile and Grout Cleaner.

   Directions

   1. Test product in an inconspicuous area to determine suitability for intended use.
   2. Pre-clean tile and grout, and remove any previous sealer from grout surface.
   3. Shake well with dome cap on.
   4. Invert bottle, press applicator directly to grout line. Apply pressure to begin liquid flow and apply liberally.
   5. Smooth excess over tile surface with tip of applicator.
   6. Allow to dry 4 hours or longer.
   7. Wipe down with damp cloth or sponge, avoiding excessive pressure directly on grout line.
   8. Polish with dry cloth or paper towel.
   9. Rinse applicator with water. Blot dry and replace cap.

   Coverage

   • 4.3 oz – 55 sq. ft (average tub/tile enclosure area)

For use on these surfaces:

• Use only on white grout
• IMPORTANT: Not intended for unglazed tile, slate, concrete block or porous stones including marble

  
  

• Restores grout lines to original whiteness
• Guards against soiling and mildew stains
• Convenient 4.3 oz applicator
• Lasts for years

  
  

Safety Recommendations

• KEEP OUT OF REACH OF CHILDREN
• CAUTION: EYE IRRITANT
• Contains Crystalline Silica. Avoid contact with eyes and prolonged contact with skin. Do not take internally.
• Avoid breathing of vapors, contact with eyes, and contact with skin.
• Contains/CAS #: Methoxy-2-Propanol/107-98-2, 2-Butoxyethanol/111-76-2, Titanium Dioxide/13463-67-1
• WARNING: This product contains a chemical known to the State of California to cause cancer.

First Aid

• EYE CONTACT: For eye contact, flush with water for 15 minutes and get medical attention.
• INHALATION: Remove to fresh air. If irritation persists, get medical aid immediately.
• SKIN CONTACT: For skin contact, wash with soap and water. If irritation persists, get medical aid immediately.
• INGESTION: Drink several glasses of water and get medical aid immediately.
• For emergencies refer to the product’s MSDS.